The Right EV Charging Setup Depends on One Thing: Usage
The best EV charging setup is sized to how your chargers are actually used. Here is how to read sessions, energy and idle time, and when the data says it is time to add more.
_ZQgwNc.webp?dpl=dpl_CCC5HZn3auX1suzqWmkiMJnen2G1)
Most businesses size their EV charging once, at the start, from a best guess. The sites that get it right keep coming back to one thing: EV charger utilisation, meaning how often the chargers are used, for how long and how much energy they deliver. Usage tells you whether you have too few chargers, too many, or the wrong kind.
What does EV charger utilisation tell you about your setup?
EV charger utilisation tells you how much of the time your chargers are actually doing their job, and that is the best guide to whether your setup fits your site. Busy chargers with drivers waiting mean you need more capacity. Chargers that sit idle point to the wrong location, speed, price or visibility, not a lack of demand.
Dwell time decides the type of charger you start with, which we cover in designing EV charging around dwell time. Usage decides everything after that: how many chargers, where the next ones go, and how you price them.
What should you measure?
Three numbers tell you most of what you need to know, and every Connekt site can see them in the Connekt Cloud back office, broken down by charger.
Sessions
How many times each charger is used a day or a week. A rising session count is the clearest sign that demand is growing at your site. It also shows which bays drivers prefer.
Energy delivered (kWh)
How much power each charger supplies. A charger with few sessions but high kWh is serving long stays, such as overnight hotel guests. Lots of sessions with low kWh means short top-ups, such as visitors at a café or gym.
Time plugged in versus time charging
A car can sit on a charger long after its battery is full. If plug-in time is far longer than charging time, the bay is blocked rather than busy, and the answer may be a time limit or an idle fee rather than another charger.
What busy and idle chargers are telling you
Usage is the most honest feedback your chargers will ever give you. The trick is reading it the right way round.
Queues at peak times: demand has outgrown capacity. That is the time to plan a second phase, ideally where cabling and power were allowed for in the first.
One charger busy, the other quiet: usually location or signage. Drivers pick the bay they can see first.
Low use overall: check the basics before blaming demand. Can drivers find the chargers in the apps they use? Is the price right? Are the chargers reliable?
High use by local drivers as well as guests: a sign the site fills a gap in the public network, which can justify a faster charger alongside slower ones.
Reliability matters most of all. A charger that is out of action records zero sessions, and drivers who find it broken may not come back. That is why Connekt watches every charger in real time: our network runs at 99.13% uptime, and up to 96.5% of faults are fixed remotely. Our article on why uptime matters more than charger count explains why.
A real example: The Speyside Hotel
At The Speyside Hotel, a family-friendly country hotel in the Speyside whisky region, Connekt installed two 11kW AC chargers designed to work within the hotel's existing power capacity.
According to the case study, usage took off quickly. The hotel has seen high charger utilisation, with queues forming at peak times, guests booking specifically because EV charging is available, and strong use from local drivers. That demand is now driving plans to expand.
It is a good example of starting at the right size and letting usage justify the next step, rather than overbuilding on day one.
Is this you?
Your chargers have been live for six months or more and nobody has looked at the usage data.
Guests or staff mention waiting for a charger.
You have a charger that hardly ever gets used.
You are planning more chargers and are not sure how many, or where.
You charge one price to everyone, whoever they are.
If you ticked two or more, your usage data is likely to change what you do next.
How to use usage data to shape your charging
1. Get the data in one place
You cannot manage what you cannot see. Every Connekt charger runs on Connekt Cloud, where you can see sessions, energy used and revenue for each charger, and generate reports whenever you need them. Our EV charging software page shows what the back office covers.
2. Review it on a set rhythm
Look at usage monthly in the first year, then quarterly. Usage often grows steadily after go-live as regular visitors discover the chargers, which we cover in what happens after EV chargers go live.
3. Fix price and access before adding hardware
Connekt Cloud lets you set different rates for staff, guests and the public on the same chargers. At Pro-Life Fitness Centre in Paisley, the manager wanted exactly that: different charging rates for staff, members and the general public on a dual 22kW charger. Getting pricing and access right can free up capacity without a single new charger.
4. Use load management to stretch your power
Load balancing shares the available power across your chargers automatically, so you can add charge points without always needing a grid upgrade. For hotels, this is often how a second phase becomes affordable. See our hotel charging and workplace charging pages for how this works on different sites.
5. Plan the next phase from real numbers
When usage shows sustained queues, add capacity where the data points. Our guide to how we measure success beyond installation explains how utilisation feeds into that decision.
When this isn't the right fit
If your chargers are not installed yet, there is no usage to read. Start with dwell time and the type of visitor you serve, then plan the first phase so it can grow. Our guide to EV charging for leisure venues is a good place to start for longer-stay sites.
Usage data also cannot fix a charger that is in the wrong place or that drivers cannot find. If a charger has been quiet from day one, look at visibility, signage and app listings first.
Frequently asked questions
What is a good utilisation rate for EV chargers?
There is no single target, because a good rate depends on the site. A hotel charger used by one overnight guest most nights is doing its job, even if it is idle during the day. A rapid charger at a busy venue needs many more sessions to earn its place. The useful question is whether drivers are waiting, not whether the charger is busy all day.
How do I know if I need more EV chargers?
The clearest sign is drivers waiting or complaining that the chargers are always in use. Rising session counts month after month, and bays blocked by fully charged cars, also point that way. Check whether time limits or pricing could free up capacity before you add hardware, then plan the extra chargers from your usage data.
Why are my EV chargers not being used?
Low use is usually about visibility, price, reliability or location rather than a lack of electric cars. Check that your chargers appear on the apps drivers use, that the price is in line with nearby chargers, that they are working and that drivers can see them from the car park entrance. Our EV charging software page explains how Connekt chargers are listed on roaming apps.
How often should I review EV charger usage data?
Monthly in the first year is a good rhythm, because usage often changes quickly after go-live. Once patterns settle, a quarterly review is usually enough, with an extra check before peak seasons. For hotels and leisure venues, comparing busy and quiet seasons shows whether you need more capacity for the peaks or simply better management of the bays you already have.
Can I charge staff, guests and the public different prices?
Yes, if your charging software supports it. Connekt Cloud lets you set different per-kWh rates for staff, guests and the public on the same chargers, and change them whenever you like. That means a workplace can offer free or discounted staff charging while visitors pay a public rate. Speak to Connekt about setting it up for your site.
The bottom line
The right EV charging setup is not a fixed decision made once on day one. It is sized to how your chargers are actually used, and it changes as usage grows. Start with dwell time, measure sessions, energy and idle time, fix pricing and access first, and let the numbers tell you when and where to add more.
If you want a second opinion on your current usage, or help planning chargers that can grow with demand, speak to Connekt.
_Z1dSRsj.webp?dpl=dpl_CCC5HZn3auX1suzqWmkiMJnen2G1)
_Z27DkFj.webp?dpl=dpl_CCC5HZn3auX1suzqWmkiMJnen2G1)
_WrWBx.webp?dpl=dpl_CCC5HZn3auX1suzqWmkiMJnen2G1)